Dimensions (Approx.)
W 62mm X H 114mm X D 24mm ( 2 1/2inches X 4 1/2inches X 31/32inches)
Weight(Approx.)
105g (3.7 oz) (only main unit)
Type
Auto electronic flash (clip-on type) with pre-flash metering
Shoe type
Multi Interface Shoe
Built-in wide panel
Yes(27mm,Standard position)
Continuous flash performance
40 flashes at 3 flashes per second 1
Color Temperature (Approx.)
5500K
Power Level switching
-
Bounce angle
Up 75deg (0deg/75deg)
Repetition (Approx.)
More than 90 times(Alkaline battery)/More than 150 times(Ni-MH battery)
Flash compensation
-
Built-in bounce sheet
-
Flash control
Flash control using pre-flash (P-TTL/ADI)
Flash Duration (Approx.)
Within 1.4ms(1/1 MANUAL)
Maximum Guide number
20 (Flash coverage setting 50mm/TELE position,ISO100・m)
Frequency (Approx.)
0.1-5.0 seconds(Alkaline battery)/0.1-4.0 seconds(Ni-MH battery)
Test flash
-
Bounce flash
Yes
Flash coverage
50mm (TELE position) ,27mm (Standard position)
Flash mode
TTL
High-speed sync(HSS)
-
Modeling flash
-
AF illuminator
-
Operating Range (Approx.)
-
Frequencies
-
Groups
-
Radio Control Wireless Function
-
Channels
-
Communication Distance (Approx.)
-
Lighting ratio control
-
Maximum Flash units
-
Channels
1 Channel
Groups
1 group
Communication Distance (Approx.)
5m 2 3
Lighting ratio control
-
Optical Controlled Wireless Flash
Yes(controller) 4
Power Level switching
-
Focal length supported
-
Continuous Lighting Time (Approx.)
-
Center Luminance Intensity (Approx.)
-
Lighting Distance (Approx.)
-
Color Temperature (Approx.)
-
Custom key settings
-
Auto zoom control optimized for image sensor size
-
Auto WB Adjustment
Yes 5
Remote release
-
Flash distribution setting
-
Memory settings
-
Charge progress indicator
-
LCD panel
-
Sync terminal
-
Multi/Micro USB terminal
-
External Battery Adaptor
-
Power source
Two AAA-size alkaline or Ni-MH batteries
Dust and moisture resistant design
-
  • Carrying pouch(1)
  • Connector protect cap(1)