Applicable Models

This information is for the following models:

  • CCB-WD1

About this download

Benefits and Improvements

  1. Compatibility with DSC-RX0M2
    The following functions of the DSC-RX0M2 can be used with the Camera Control Box.
    • Clear Image Zoom (*1)
    • One Push AF
  2. Improvement of basic functions and added functions
    • Faster transfer of files from CCB to PC
    • Import all new files only
    • Import all files from all cameras
    • Increased file size limit for file transfers from CCB to PC (previously limited to 4 GB) (*2)
    • Added function to name the files with the shooting time, to distinguish simultaneously-shot contents
    • Improved stability and performance
 Important notes:
(*1) The zoom function of DSC-RX0 is not supported.
(*2) It is possible to transfer movie files up to 40GB.
*The updated camera control box can be used with DSC-RX0 version 3.00 or later. Please visit the Downloads section of the DSC-RX0 Product Page on our support site.
*Please refer to the HelpGuide for more information on updated functions.

File Info

File Name

  • CCB-WD1 System Software (Firmware) Update Ver.2.00

File Version

  • 2.00

File Size

  • Windows: 42.3 MB (44,424,632 bytes) / Mac: 44.4 MB (44,424,632 bytes)

Release Date

  • 11-04-2019

Preparation

Check the system software version

Follow the instructions below to check the system software version. If the system software version is Ver. 2.00, the update is not required.

  1. Connect the USB cable from the computer to the camera control box (CCB-WD1).
  2. Start the Web browser on the operation PC and access
    URL: http://169.254.200.200
    enter address
  3. The current version of the camera control box connected to the Web browser is displayed.
    Please check if the update is necessary.
    old version

System Requirements

Operating systems

The latest version of the system software update is compatible with the following OS versions:

  • Windows® 10
  • Windows® 8.1
  • Windows® 7 SP1
  • Apple® macOS 10.12–10.14

Computer Hardware

The latest version of the system software update is compatible with the following hardware:

  • Hard disk space: 500 MB or more (Windows)/600MB or more (Mac)
  • RAM: 512 MB or more
    Note: Please close all other application software before updating the system software.

Other Hardware

  • USB cable supplied with the camera control box
    Note: Update functionality is not guaranteed with any other USB cable.
  • AC Adapter (AC-UUD12) supplied with the camera control box
  • LAN cable
    Note: It is recommended that you use LAN cables rated as category 5e or higher.
  • Switching hub
    Note: To update multiple camera control boxes at once, it is recommended that you use 1000BASE-T switching hubs.

Download & Install

Important notice

  • Use the AC Adapter (AC-UUD12).
  • Prevent your computer from entering Sleep mode.
  • Do not connect the camera control boxes to any other devices except your computer.

How to download the Updater:

  1. Make sure that you are logged on as a user with administrative rights.
  2. After reading the disclaimer, click Download.
  3. The [Update_CCBWD1V0200.zip] file will start downloading.
  4. Save the file to the desktop of your computer (recommended).

  5. Note for Windows 8.1/10 users:
    With the standard settings of Internet Explorer, the update file will be saved in your Downloads folder.Click the Desktop icon on the Start screen and find the downloaded file in the Downloads folder using Explorer.

Step 1: Start the Updater

  1. Close all programs currently running on your computer.
  2. Connect your computer and camera control box using a LAN cable.
    • Update multiple (*) camera control boxes
      *Up to 100 units can be supported
      multi connection diagram
    • Update one camera control box
      single connection diagram
  3. Set the camera control box power switch to "ON".
    Note: Even if the camera is not connected, an update is still possible.
  4. Start the Web browser on the operation PC and access
    URL: http://169.254.200.200
  5. Click the [Box] tab in the Web browser displayed.
    Click the Box tab
  6. Click the [Update] button next to Firmware Update.
    Click the Update button
  7. When the confirmation message dialogue is displayed, click the [OK] button on the dialogue.
    click the OK button
    Note: To cancel the update, please click the [Cancel] button on the dialogue.
  8. Select the firmware downloaded in advance from the file reference dialogue.
    Note: To cancel the user update, please click the [Cancel] button.
  9. Transfer update file to the camera control box
    A message dialogue during file transfer is displayed and the firmware is transferred to the camera control box.
    transferring
    Notes: When multiple camera control boxes are connected, they will be transferred one by one.
    • To cancel the update, please click the [Cancel] button on the dialogue.
    • If you cancel the update, you will return to the "Click the update" procedure.

    • Do not pull the LAN cables out or turn off the camera control box while it is running. This may cause the product to fail.
    • An abort operation cannot be performed when the transfer is completed and the update is started.
  10. Perform update.
    The message dialogue being updated will be displayed and the update will start.
    updating
    Note: The update will be implemented at the same time, even when multiple camera control boxes are connected.
  11. Complete the update and confirm the restart of the camera control box. When the update completion message dialogue is displayed, click the [OK] button.
    Complete the update
  12. Restart the camera control box. The restarting message dialogue will be displayed and the camera control box will be restarted.
    Restart the camera control box

Step 2: Confirm the system software version of your device is Ver.2.00.

  • When the camera control box starts up, a new version is displayed in the Web browser. The update is completed.
    new version

Questions & Answers

  • When the "Error" dialogue is displayed when selecting a file
    If the following dialogue is displayed when selecting a file, the correct firmware file may not be selected.
    invalid file
    Click the [OK] button in the dialogue. You will return to the "Click the update" procedure screen.
    Select the correct firmware file and update again.

  • When "Update Warning" is displayed at the time of update
    If you see the following display after the update execution, the camera control box has already been updated, or the firmware you tried to update may be an older version.
    update warning
    This may occur if versions are mixed, such as when updating multiple camera control boxes in advance.
    The camera control box with the warning above will not be updated in this update. If you need to update, check the firmware version again.

  • When "Update failed" is displayed when powering on (including reboot)
    If you see the following display when the camera control box is powered on (including reboot),the update may have failed, such as when the camera control box was powered off during the update.
    update failed
    The camera control box displayed above has not been updated properly. Return to the "Click the update" procedure screen and update again.