Article ID : 00228131 / Last Modified : 31/05/2019

Set up a flash with both radio and optical wireless features to optical wireless mode

    Follow these steps to set up your external flash in optical wireless mode.

    NOTES:

    • For optical wireless communication, make sure the controller and remote are within 5 meters of each other.
    • Make sure the controller and remote use the same channel for wireless communication.
    • It's better to use radio wireless mode if both controller and remote have radio wireless features. Refer to the manual for model-specific instructions.

     

    Set Up the Flash as a Controller

    1. Mount the flash on your camera's multi-interface shoe.
    2. Set your flash to optical wireless.
      1. Press the MENU button.
      2. Select the tab for Image indicating the icon for the radio wireless flash .
      3. Select Image indicating the item that selects either the radio wireless flash or optical wireless flash.
      4. Select the icon for Image indicating the icon for the optical wireless flash .
    3. Set your flash in optical CTRL mode:
      1. Press the WL button.
      2. Select Icon indicating the controller in the optical wireless mode .

     

    Set Up the Flash as a Remote

    1. Set your flash to optical wireless.
      1. Press the MENU button.
      2. Select the tab for Image indicating the icon for the radio wireless flash .
      3. Select Image indicating the item that selects either the radio wireless flash or optical wireless flash.
      4. Select the icon for  Image indicating the icon for the optical wireless flash .
    2. Set your flash in optical RMT mode:
      1. Press the WL button.
      2. Select Icon indicating the remote in the optical wireless mode.