Article ID : 00203696 / Last Modified : 26/10/2018

While setting a set-top box, the input suddenly switches to TV input.

Applicable Products and Categories of This Article

If the set-top box (STB) and TV are connected through HDMI, the input may suddenly switch to TV input while you are setting the STB. 
In such cases, set the BRAVIA Sync control setting to Off. When you are finished setting the STB, you can set the BRAVIA Sync control setting back to On.

Follow the steps below to set BRAVIA Sync control to On or Off.

  1. Press the HOME button on the remote control.
  2. Select  Settings.
  3. Select External inputs.
  4. Select BRAVIA Sync settings.
  5. Set BRAVIA Sync control to On or Off.

NOTE: You can also set the STB from the following procedure.

  1. Press the HOME button on the remote control.
  2. Select  Settings.
  3. Select Initial Setup.