Skip to Content

Applicable Models

This information is for the following models:
  • BDP-S590
  • BDP-S490

About this download

This utility is only for use with the products identified and sold in Asia Pacific. Not all models are sold in all countries. 
This utility updates BDP-S490/S590 firmware to version M12.R.0510 and provides the following benefits:

  • Disable SSL for Poodle issue

Recommended Operating System for the computer to create an upgrade disc:

  • Microsoft® Windows® XP
  • Microsoft® Windows® XP MCE
  • Microsoft® Windows Vista® Home Basic
  • Microsoft® Windows Vista® Home Premium
  • Microsoft® Windows Vista® Business
  • Microsoft® Windows Vista® Ultimate
  • Microsoft® Windows Vista® Home Basic 64-bit
  • Microsoft® Windows Vista® Home Premium 64-bit
  • Microsoft® Windows Vista® Business 64-bit
  • Microsoft® Windows Vista® Ultimate 64-bit
  • Microsoft® Windows ® 7 Home Premium 32-bit
  • Microsoft® Windows ® 7 Home Premium 64-bit
  • Microsoft® Windows ® 7 Professional 32-bit
  • Microsoft® Windows ® 7 Professional 64-bit
  • Microsoft® Windows ® 7 Ultimate 32-bit
  • Microsoft® Windows ® 7 Ultimate 64-bit
  • Microsoft® Windows ® 8
  • Microsoft® Windows ® 8.1

Check the Current Firmware Version 

  1. Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.
  2. Power on the Blu-ray Disc player.
  3. If the player starts to play a disc, press the STOP button and wait until the xross media bar™ menu is displayed on the television before proceeding.
  4. Use the arrow keys on the remote control to select Setup – System Settings, and then press the ENTER button.
  5. Use the arrow keys to select Quick Start Mode and make sure that the Quick Start Mode is set to Off.
    If the Quick Start Mode is set to On, change the setting to Off. Otherwise, the firmware update may not succeed.
  6. Use the arrow keys to select System Information, and then press the ENTER button.
  7. The firmware version currently installed on the Blu-ray Disc player will be listed on the television screen..

    If the last four digits of the version number are 0510or higher, it is not necessary to install this firmware upgrade.

How To Get the Firmware upgrade 
There are two ways to perform the BDP-S490/S590 Firmware update:
Network upgrade: 

  • The Network upgrade operation is straightforward, so it is highly recommended that you use the Network upgrade method.
  • You will need to connect the Blu-ray Disc player to your Internet source using an Ethernet cable.
  • Please see the Network upgrade Instructions section, for more information.

Create an upgrade Disc:

Network Upgrade Instructions 
The Network Update operation is straightforward, so it is highly recommended that you use the Network Update method to update the BDP-S490/S590 firmware.
Important Notes

  • WARNING!! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair.
  • WARNING!! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair.
  • In order to use this update method it is necessary to have the player correctly connected to an active Internet connection.
  • In order to perform the firmware upgrade, it is necessary to have the system correctly connected to a compatible television.

Firmware upgrade Instructions 
Note: The firmware upgrade process usually takes about 15 to 30 minutes, depending on system configuration and network connection.

  1. Power on the television and make sure it is tuned to the inputs to which the BD player is connected.
  2. Connect the LAN(100) terminal on the Blu-ray Disc player to your Internet source using an Ethernet cable.
  3. Power on the Blu-ray Disc player.
  4. If there is a disc in the Blu-ray Disc player, please remove the disc.
  5. At the xrossmediabar (XMB) , use the arrow keys on the remote control to select Setup - Network Update and then press the ENTER button.
  6. Perform version update? message is displayed.
  7. Select OK and then press the ENTER button.
  8. The first portion of the update process starts and the progress screen is displayed on the television
  9. During the update the message */9 is displayed on the television.
    Note: The * changes to 0 through 9, indicating the update progress.
  10. The Blu-ray Disc player will restart itself when it is complete and the second portion of the update will start.
  11. The software update starts and the progress screen is displayed on the television.
  12. During the update the message */9 is displayed on the television.
    Note: The * changes to 0 through 9, indicating the update progress.
  13. The firmware update is complete when the Blu-ray Disc player automatically powers off.
    WARNING!! Do not operate or power off the player until the update is complete. Doing so may cause the Blu-ray Disc player to be unresponsive or to require repair.
  14. Power on the Blu-ray Disc player.
  15. Check the current firmware version to confirm that the upgrade has successfully installed.
    Note: If the last four digits of the version number are 0510, the firmware upgrade was successful.
    If you have questions or require assistance, please contact Sony.

Network Firmware upgrade FAQ

  1. When running network upgrade, the television displays the message, "Connection status cannot be confirmed" and you cannot perform the firmware upgrade. 
    There may be a problem with the network connection. Verify that the network connection and settings are correct.
    1. Check the Ethernet cable to make sure it is securely connected to the LAN(100) terminal on the unit and to the Internet source.
    2. Check the Blu-ray Disc player network settings and confirm that the player has its own IP address.
    Note: If you use a proxy server, enter the IP address of the proxy server you use, instead of the proxy host name, in the Proxy Server input field.
    3. Follow the Network upgrade Instructions again.
  2. The power was shut down during the upgrade process.
    Power on the Blu-ray Disc player, and then follow the Network upgrade Instructions again.
  3. The firmware update process is still not finished after running for more than 30 minutes. 
    Please contact Sony. 
  4. The firmware update continues to fail after multiple tries. 
    Follow the steps in the Download the Firmware and Create an Update Disc section to create an update disc.
    1. Insert the update disc at the update failed screen, and then select Retry on the screen.
    2. If the problem still persists, please contact Sony.

File Info

File Name

  • UPDATA_M12R0510.zip

File Version

  • M12.R.0510

File Size

  • 98.74MB

Release Date

  • 2014-12-23

System Requirements

  • Windows 7
  • Windows 8
  • Windows 8 32bit
  • Windows 8 64bit
  • Windows Vista
  • Windows XP

Install

Details

Download the Firmware and Create an upgrade Disc 
If you cannot connect the player to your Internet source, please use the disc update method.
Important Notes:

  • If you have not done so already, please check the current firmware version to determine if this firmware update is needed for your Blu-ray Disc player.
  • WARNING!! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair
  • WARNING!! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair.
  • Use a brand new CD-R disc to burn the firmware update. The player may not be able to correctly read a dirty disc or a disc with scratches.
    Note: A CD-R disc is strongly recommended. Do not use a CD-RW disc.
  • Recommended operating system for the computer that will download the firmware update: Windows® 8.1, Windows® 8, Windows® 7, Windows® Vista or Windows® XP is recommended.
  • A drive with CD disc burning capability and a new blank CD-R disc are required to create the update disc.
  • After you create the disc, please see the Disc Update Instructions section below, for more information.
  • In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download and Disc Creation Instructions

  1. Download the UPDATA_M12R0510.zip file to a temporary or download directory (please note this directory for reference).
  2. Go to the directory where the file was downloaded and verify that the size of the UPDATA_M12R0510.zip file is 103,531,284 bytes.
    a. Right-click the UPDATA_M12R0510.zip file, and click Properties.
    b. On the UPDATA_M12R0510.zip Properties screen, verify that the Size: listed is 98.7 MB (103,531,284 bytes).
    Note: The Size on disk: listed may be different. That is normal.
    c. If the file size is different than the 103,531,284 bytes, please download the UPDATA_M12R0510.zip file again.
  3. Double-click the UPDATA_M12R0510.zip file to extract the firmware files.
    Note: Two files will be extracted: MSB12-FW.BIN and MSB12-FW.ID
  4. Burn the MSB12-FW.BIN and MSB12-FW.ID files to a new CD-R disc and be sure to finalize the disc.
    Note: Click here for instructions on how to burn the update CD.
  5. If write errors occur during the CD burning process, discard the disc and create a new update disc.

Disc upgrade Instructions 
The instructions below are for how to install the firmware upgrade using a disc.

Firmware upgrade Instructions
WARNING!! Do not power off the player or disconnect it from the AC power outlet. Doing so may damage the player to the point of requiring repair.
WARNING!! Do not press any buttons, except as instructed, until the update is complete. Doing so may damage the player to the point of requiring repair.

Note: The firmware update process takes a minimum of 15 minutes.

  1. Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.
  2. Power on the Blu-ray Disc player.
  3. Place the update disc in the player, and close the disc tray.
  4. After the disc is loaded, the message, Perform version update? is displayed on the television
  5. Use the remote control to select OK, and then press the ENTER button.
  6. The first portion of the update process starts and the progress screen is displayed on the television.
  7. During the update, the message */9 is displayed on the television.
    Note: The * changes to 0 through 9, indicating the update progress.
  8. The Blu-ray Disc player will restart itself when it is complete and the second portion of the update will start.
  9. The software update starts and the progress screen is displayed on the television.
  10. During the update, the message */9 is displayed on the television.
    Note: The * changes to 0 through 9, indicating the update progress.
  11. The firmware update is complete when the Blu-ray Disc player automatically powers off.
    WARNING!! Do not operate or power off the player until the update is complete. Doing so may result in your player being unresponsive and requiring repair.
  12. Remove the update disc from the player.
  13. Power on the Blu-ray Disc player.
  14. Check the current firmware version to confirm that the update has successfully installed.
    Note: If the last four digits of the version number are 0510, the firmware update was successful.

If The Update Disc Does Not Eject
If the update disc does not eject even though the update has finished, please follow the steps below.

  1. Power off the Blu-ray Disc player, and disconnect the AC power cord.
  2. Reconnect the AC power cord while simultaneously holding down the Open/Close button on the player.
    Note: Pressing the Open/Close button on the remote control does not work. It is necessary to press Open/Close button on the Blu-ray Disc player.
  3. Keep pressing the Open/Close button until the disc tray opens.
  4. Remove the disc.

Disc Firmware upgrade FAQ

  1. The power was shut down during the upgrade process. 
    Power on the Blu-ray Disc player. The update should restart automatically.
  2. When I double click on the UPDATA_M12R0510.zip update file I downloaded from the update web site, the “MSB12-FW.BIN” and “MSB12-FW.ID” files are not created.
    The download may have failed. Delete the downloaded file and follow the steps in the Download the Firmware and Create an upgrade Disc section to create a new upgrade disc.
  3. The firmware upgrade process is still not finished after running for more than 30 minutes.
    Please contact Sony.