Skip to Content

Applicable Models

This information is for the following models:
  • ILCE-7M2
  • ILCE-7M2K

About this download

This information is for the following models:
  • ILCE-7M2

Benefits and improvements from the latest update

  • Improves operability of the camera:
    1. Improves operability when AF area is set to flexible spot
      Refer to here for details.
    2. Adds "Live View Display" into custom button assignation
    3. Adds "Set File Name" function
  • Supports visible light LED in external flash for AF (HVL-F45RM)
  • Improves release time lag when wireless flash is used
  • Improves overall stability of the camera

Previous Benefits and Improvements

  • Improves the symptoms of insufficient light amount at the edge of flash photographed images depending on the shooting conditions with the system software version "Ver.3.20".

Check the system software version

Follow the instructions below to check the system software version. If the system software version is Ver.4.00, the update is not required.

  1. Select Menu > Setup subpage 6 > Version on the camera.
  2. The system software version is displayed as illustrated below.

File Info

File Name

  • Update_ILCE7M2V400.exe

File Version

  • 4.00

File Size

  • 219.0MB

Release Date

  • 2017-06-08

System Requirements

  • Windows 10
  • Windows 7
  • Windows 8 32bit
  • Windows 8 64bit

Download

Operating Systems


The latest version of the system software update is compatible with most commonly used versions of Microsoft Windows:
  • Windows® 10
  • Windows® 8.1
  • Windows® 7 SP1

Computer hardware


The latest version of the system software update is compatible with the following hardware:
  • Hard drive space: 500 MB or more
  • RAM: 512 MB or more
    Note: Please close all other application software before updating the system software.
  • Power source for the camera
    • Fully charged rechargeable battery pack NP-FW50 or AC adapter AC-PW20 (sold separately)

      Note: The update can only be performed when the battery power level is (three bars) or more. We recommend that you use a fully charged battery or the AC adapter AC-PW20 (sold separately). Detach the vertical grip before updating system software.
  • USB cable supplied with the camera

    Note: Update functionality is not guaranteed with any other USB cable.

Install

Details

Important Notice

  • Use a fully charged rechargeable battery pack NP-FW50 or the AC adapter AC-PW20 (sold separately).
  • Do not remove the battery or AC adapter during the update; as the sudden loss of power may render the camera inoperable.
  • Remove the memory card from the camera before starting the update process.
  • Prevent your computer from entering Sleep mode.
  • Do not connect the camera to any other devices except your computer.

How to download the Updater:

  1. Make sure that you are logged on as a user with administrative rights.
  2. After reading the disclaimer, click Download.
  3. The file [Update_ILCE7M2V400.exe] file will start downloading.
  4. Save the file to the desktop of your computer (recommended).


  5. Note for Windows 8.1/10 users:

    With the standard settings of Internet Explorer, the update file will be saved in your Downloads folder. Click the Desktop tile from the Start screen and find the downloaded file in the Downloads folder by using Explorer.

Step 1: Start the Updater

  1. Close all programs currently running on your computer.
  2. Double-click the [Update_ILCE7M2V400.exe] file that you downloaded. Do not connect the camera to the computer yet.
  3. The System Software Updater starts.

  4. Turn on the camera.
  5. Following the instructions in the System Software Updater window, on the camera, select Menu > Setup subpage 4 > USB Connection and check if Mass Storage is selected.
    If a mode other than Mass Storage is selected, please select Mass Storage.
  6. Connect the camera to the computer with the supplied USB cable. "USB Mode" appears on the LCD screen of the camera.
    Note: If the computer cannot find the device, the message "Could not find the camera for this update" is displayed on the computer screen. Please try the following:
    • Disconnect the USB cable and connect it again.
    • If the computer has multiple USB terminals, try with the other terminals.
    Sometimes when the camera is connected to the computer with the USB cable, a message prompting you to restart the computer may be displayed. In this case, remove the battery pack or AC adapter from the camera, reboot the computer, and follow the instructions from "2. Start the System Software Updater".
  7. Check the LCD screen of the camera, then click Next. The current version number and updated version number appear on the lower left side of the screen. After confirming that the current software version is "Ver.3.30 or earlier", click Next. If the current system software version is 4.00 or later, the update is not required. In this case, disconnect the camera from the computer and click Finish. Turn off the camera, remove the battery pack and/or the AC adapter, reinsert the battery or reconnect the AC adapter and turn the camera back on.

    Update is required


    Update is not required
  8. Click Next. The following screen appears.
  9. After automatically resetting, the following screen is shown.
    The progress bar appears during the update process (approximately 15 minutes).

    Note: Never turn off the camera or disconnect the USB cable while updating.
  10. When the update is complete, the device will automatically restart. Make sure the device is turned on and wait until the LCD screen starts up. Click Finish when the LCD screen appears and disconnect the USB cable.

    After restarting, a data recovery warning is sometimes displayed. This is normal. Please wait until this warning disappears.

Step 2: Confirm the system software version of your device is Ver.4.00.

  1. On the camera, select Menu > Setup subpage 6 > Version
  2. The system software version is displayed as illustrated below.