Skip to Content

Applicable Models

This information is for the following models:
  • FDR-AX30
  • FDR-AXP35

About this download

Thank you for your continued interest in Sony products.
Sony is offering a system software update for Digital 4K Video Camera Recorder FDR-AXP35 and FDR-AX30.

Improvements:
In addition to SDXC card, the camera records XAVCS format video with SDHC card.

  • When shooting movies in XAVC S format, it requires SD Speed Class10, or UHS Speed Class U1 or faster. (When recording in 100 Mbps or more, UHS Speed Class U3 is required.)
  • When an SDHC memory card is used to record XAVC S movies over extended periods of time, the recorded movies will be divided into files of 4 GB. The divided files can be integrated into a single file using PlayMemories Home.

How to check the System Software version

  1. Select Menu > Setup > General Settings > Version on the camera.
  2. The System Software version is displayed. If the Version is version 1.10, this upgrade is not required.


    FDR-AXP35


    FDR-AX30

File Info

File Name

  • Update_FDRAXP35V110.exe

File Version

  • 1.10

File Size

  • 212.0MB

Release Date

  • 2016-04-26

System Requirements

  • Windows 10
  • Windows 7
  • Windows 8 32bit
  • Windows 8 64bit

Download

Preparing for System Software update

System requirements for a computer

  • Supported OS
    • Windows 10
    • Windows 8.1
    • Windows 7 SP1

  • Other System Requirements
    • Hard disk space: 500MB or more
    • RAM: 512MB or more
Other Items
  • Power source for the camera
    Fully charged rechargeable battery pack NP-FV70 or AC Adaptor.

    Note: We recommend that you use a fully charged battery or the AC adaptor.

  • USB support cable supplied with the camera

    Note: Update functionality is not guaranteed with any other USB cable.

Install

Details

Important Notes:

  • Please close all other application software before upgrading the System Software.
  • Prevent your computer from sleeping beforehand.
  • When performing the system software update, please use a fully charged rechargeable battery pack NP-FV70 or the AC adaptor.
  • Do not remove the battery or AC adaptor during the update; otherwise, the camera may become inoperable due to the sudden power shutdown.
  • Remove the memory card from the camera beforehand.
  1. Download the update file
    Download the file to your computer. Please save the downloaded file onto the Desktop of your computer (recommended).

    For Windows8.1 and Windows10 users:
    Under the initial settings of Internet Explorer, the update file will be saved in the Downloads folder. Click the Desktop tile from the Start screen and find the downloaded file in the Downloads folder by using Explorer.

  2. Start up System Software Updater
    Close all currently running programs on your computer, then double click Update_FDRAXP35V110.exe to start up System Software Updater.

  3. Check the USB connection mode
    1. Turn on the camera.
    2. According to the System Software Updater instructions, select Menu > Setup > Connection > USB Connect Setting on the camera, then check if Mass Storage is selected. If a mode other than Mass Storage is selected, select Mass Storage.

  4. Check if the update is required
    1. After confirming the LCD monitor of the camera, click Next. The current version and the version after the upgrade appear on the below screen.

      Upgrade is required


      Note: If the below screen appears, the upgrade is not required. According to the message, stop the USB connection and click Finish. Turn off the camera, remove the battery pack or the AC adaptor, re-insert the battery pack or connect the AC adaptor, then then turn on the camera again.

      Upgrade is not required

    2. After confirming Current version is Ver. 1.00, click Next.

  5. The camera automatically reset
    The following screen appears.
  6. Start the update
    After automatically resetting, the below screen appears and the update starts. The progress bar appears while updating (approximately 15 minutes).


    Note: Never turn off the camera nor disconnect the USB cable while upgrading.

  7. Complete the update
    When the update is completed, the camera will automatically restart. Make sure the camera is turned on and wait until the LCD screen appears again. Click Finish when the LCD screen appears and disconnect the USB cable.

  8. Check the System Software version
    Follow the instruction to confirm the System Software version is Ver. 1.10.
    Select Menu > Setup > General Settings > Version on the camera. The system software version is displayed.


    FDR-AXP35


    FDR-AX30