Skip to Content

Applicable Models

This information is for the following models:
  • DSC-KW11

About this download

Thank you very much for your continued support.
Sony is offering a System Software update for Digital Still Camera DSC-KW11.

Applicable Model
 Digital Still Camera DSC-KW11

Applicable System Software version
 The applicable products are with the system software Ver 1.00 or Ver 1.03.
 
Contents of update
 This update includes a brighter display monitor panel and the ability to save mirror images.


Supported OS

 Microsoft Windows
  Windows 8.1
  Windows 7  SP1

 Other system requirements  

  - Hard disk space: 200MB or more
  - RAM: 512MB or more
    * Please close all other application software before updating the system software.


 Apple Macintosh
  Mac OS X v.10.6 – v10.10

 Other system requirements

  - CPU: Intel processor (Core Solo and Core Duo processors are no longer supported.)
  - Hard disk space: 200MB or more
  - RAM: 512MB or more
    * Please close all other application software before updating the system software.
    * Prevent your computer from going into Sleep Mode beforehand.

Other Items

  Power source of the camera
  Fully charged rechargeable battery pack NP-BN.

  Note: The update can be performed only when the remaining battery level is Full. We recommend that you use a fully charged battery.

  Memory Card for  the update
 
  Note: A memory card of more than 100 MB of capacity is necessary to the update.
       
        Memory card can be used in the camera is listed below.
         - Memory Stick Micro media:
            (Memory Stick Micro (M2) media/Memory Stick Micro (Mark2) media)
         - MicroSD Memory card:
            (microSD memory card/microSDHC memory card/microSDXC memory card)

File Info

File Name

  • KW1_KW11.zip

File Version

  • 2.00

File Size

  • 12.34MB

Release Date

  • 2015-03-20

System Requirements

  • System OS

Download

Important Notes:

  • When performing the system software update, please use a fully charged rechargeable battery pack NP-BN.
  • Do not remove the battery pack during the update; otherwise, the camera may become inoperable due to the sudden power shutdown.

Install

Details

  1. Download the update file
    • Click on the file KW1_KW11.zip to begin download.
    • Please unzip the downloaded file, and save the unzipped file onto the root directory of the memory card (microSD memory card or Memory Stick Micro (M2 or Mark2) media).

  2. Start the update
    1. Insert the memory card to the camera
    2. Turn ON the camera
  3. Check the System Software version
    1. According to the Firmware Updater instructions, select Menu > Settings > (MENU Scroll up) > Version on the camera.

      Note: When Version is not indicated, please confirm whether there is the update data in the root directory of the memory card.







  4. Start the update
    1. The version number is indicated as below.

      Case when version is Ver 1.00

      Note: In case of the system software version is Ver.1.00, the version number is indicated as above.

      Case when version is Ver. 1.03
    2. To start the update, select OK
  5. Wait until the update is completed
    1. Do not remove the battery pack during the update, otherwise, the camera may become inoperable due to the sudden power shutdown. It will take about 1 minute to complete update program.







  6. Update complete
    1. Please power OFF using the power key.

  7. Check the System Software version

    Follow the instruction below to confirm the System Software version is Ver.2.00.

    Select  Menu > Settings > (MENU Scroll up) > Version on the camera.
    The system software version is displayed



    When confirmation is done, please select Cancel and end the MENU.

  8. Reset the camera

    Finally, select Menu > Settings > (MENU Scroll up) > Initialize on the camera. It is important to complete all settings.